Super Rejection Kits
Epoxy-Coat kits are all made with the highest quality epoxy coating chemistry available. These kits are the exact formula we sell to approved contractors for use at Ford Motor Company, NASA, US NAVY (Aircraft Carriers and various warships), US Airforce, Chrysler, General Motors just to name a few.
The flake to rejection Premium kits offers a clear top coat with enough flake to broadcast over the base coat to rejection. Once flaked the epoxy base coat will not show through. A completed flake to rejection floor will outperform standard and premium systems due to the fact that adding flake to rejection will increase the thickness to nearly 1/16" total. This thicker floor will hide most imperfections and will appear monolithic.
Adding this flake is compared to adding aggregate to concrete, which adds added strength against peeling and chipping. Scratching will show much less over time and wearing properties will be greatly increased. This is a perfect system for any concrete/wood/metal surface including outdoor applications. If the US Theodore Roosevelt Aircraft Carrier (the largest warship in the world) uses this system from Epoxy-Coat on its decking surfaces you can be assured it will perform well in your garage.
With UV protection
Performance Polyurethane is recommended where very high UV resistant is desired with exceptional mar resistance. This is the only product we recommend as a top coat for exterior surfaces exposed to UV. Contact us today for details!
Super Rejection Kit Includes
- 2 Gallons of Epoxy-Coat® Part A Color
- 1 Gallon of Epoxy-Coat® Part B
- 3 Gallons of Epoxy-Coat® Part A Clear
- 1.5 Gallon of Epoxy-Coat® Part B
- Polyurethane top coat
- 100 Lbs. Decorative flake
- 0.25 Lbs. of aluminum oxide non-skid
- Prep Solution
- 1 Pair Spiked Shoes
Super Rejection Application Tools
- 3 Cut to chip brushes
- 3 Roller Covers
- 3 Squeegees
- Mechanical Mixer
- Rubber Gloves
- Measuring Stick