You have no items in your shopping cart.
2 - COMPONENT CLEAR PATCHING KIT, BONDS, FILL & SEAL CRACKS, CONTROL JOINTS AND LOW SPOTS IN CONCRETE FLOORS. THIS PRODUCT IS RECOMMENDED PRIOR TO YOUR EPOXY FLOOR APPLICATIONS.
Comparable Competitor Price Match Guarantee
Used prior to applying the epoxy to repair concrete spalling, chipping, and cracking, and it can be used to fill expansion joints/saw cuts.
DIRECTIONS: MIXING RATIO: 2 to 1. Pour contents of Part “B” completely into Part “A” pail while mixing with drill mixer, be sure to wipe all sides and bottom of mixture to thoroughly, mix contents together for 3 minutes. Then apply to joints or cracks with a flat squeegee, leaving a very thin coating on the surface, but allowing the patch to fill the depression. Any high build ups will be visible when you apply top coat. Some sanding is required.
WARNING: MAY BE HARMFUL IF SWALLOWED. MAY CAUSE SKIN AND EYE IRRITATIONS. EYE PROTECTION AND RUBBER GLOVES ARE ALWAYS RECOMMENDED WHEN HANDLING THIS PRODUCT.
FIRST AID: IN CASE OF EYE OR SKIN CONTACT, FLUSH WITH LARGE AMOUNTS OF WATER FOR MINUIM OF 15 MINUTES, IF IRRITATION PERSISTS, SEE PHYSICAN. IN CASE OF ACCIDENTAL INGESTION, DO NOT INDUCE VOMITING, DRINK LARGE QUANTITIES OF WATER TO DILUTE PRODUCT. SEEK MEDICAL ATTENTION AT ONCE. Read MSDS thoroughly before using.
DISPOSAL: PRECAUTIONS ON THIS LABEL ALSO APPLY TO EMPTY CONTAINERS. RINSE EMPTY CONTAINER AND DISPOSE OF IN ACCORDANCE WITH COMPANY POLICY AND GOVERNMENT REGULATIONS.
KEEP OUT OF REACH OF CHILREN. KEEP FROM FREEZING. FOR INDUSTRIAL USE ONLY.