Our Good epoxy floor coating kits include enough flake chips for a light flake density. Our Better epoxy floor coating kits include enough flake chips for medium flake density. Our Best epoxy floor coating kits include enough flake chips for rejection density (flakes cover the entire base coat).
Adding flakes to your epoxy floor coating adds strength to the coating, hides imperfections, prolongs the life of the coating, makes the floor less slippery, and can improve the look over a bare base coat color.
Classic Base Coat-Flake Combinations We Recommend:
- Beige Base Coat with Beige Blend Flakes
- Gray Base Coat with Domino Blend Flakes
- Gray Base Coat with Blue Gray Blend Flakes
- Dark Gray Base Coat with Gray Blend Flakes
- Dark Blue Base Coat with Blue Blend Flakes
- Tan Base Coat with Beige Blend Flakes
- Taupe Base Coat with Black White Green Flakes
- Taupe Base Coat with Canyon Brown Fine Flakes
Light density requires 3-4 lbs. per 1,000 sq ft.
Medium density requires 5-10 lbs. per 1,000 sq ft.
Heavy density requires 20-30 lbs. per 1,000 sq ft.
Rejection density requires 150 lbs. per 1,000 sq ft.
If you choose the fine flakes the amounts need to be doubled to achieve the right density.
Flake colors listed below are not guaranteed to be in stock at all times.
Some flakes are only available in fine size.
The FINE is shown with our 1/16″ (fine) flakes. When ordering you will have the option of selecting either the Standard or Fine flakes included in our complete coating kits.
Found The Perfect Flakes?Purchase Flakes
Standard Flake Colors
Beige Blend Epoxy flakes
Blue Blend epoxy flakes
Gray Blend Epoxy flakes
Domino Epoxy Flakes
Onyx Black with Ivory Blend Epoxy Flakes
Onyx Black epoxy flakes
Canyon Brown epoxy flakes
BLACK WHITE GREEN EPOXY FLAKEs
BLUE GRAY BLEND EPOXY FLAKEs
Custom Flake Colors