Epoxy-Coat Contents
Epoxy-CoatTM is an affordable and durable Cycloaliphatic 100% solids epoxy coating designed to enhance the look and longevity of concrete or wood floors in both interior/exterior residential or industrial applications.
Epoxy-CoatTM is available in four different standard base color coatings: beige, tan, gray and taupe. The kit also contains color chips that may be added for decorative finishing and slip resistance. A standard kit coats approximately 500 square feet of concrete floor. Custom coloring is available. See below for a detailed product list.
When we conceptualized the idea for our residential epoxy system we wanted to make sure that the homeowner did not have to go out and purchase anything else to complete the job except the roller assembly and handle. This is why we have included all the epoxy coatings and application products that you will need to start and finish the painting of your floor. If preferred, professional installation is always available.
Our Kit Contains Everything You Need to:
|
|
Etch the surface in order to prepare it for coating
Mechanically mix the two part epoxy coating
Surface your floor with 100% solids epoxy
Fleck the finished epoxy paint
Non-Slip Aluminum Oxide
|
 |
Each Kit Specifically Contains:
|
|
|
(3 Gallons of Epoxy)
2 Gallons of Epoxy-CoatTM Part A
1 Gallon of Epoxy-CoatTM Part B
Epoxy Clean & Prep Solution
Roller Cover
Cut-In Chip Brush
Squeegee
Mechanical Mixer
Gloves
Aluminum Oxide (Non-slip)
Color Chips (Included, but optional)
Re-Usable 6, 2 and 1 Gallon bucket Containers w/Lids
Measuring Stick
Instructions
|
|
